News Center
Contact: Mr. Jin
Tel: 13901575780
0512-52428686
Contact: Mr. Zha
Tel: 13913639797
0512-52422071
Address: No. 59, Huyi Road, Liantang, Shanghu Town, Changshu City, Jiangsu Province.
-
2026-06-29
What issues should be noted during the daily maintenance of high-speed steel V3 saw blade milling cu
V3 belongs to high vanadium high-performance high-speed steel, with a hardness of HRC63~66 and strong wear resistance. However, it is prone to annealing at high temperatures, has a thin and easily deformed substrate, is resistant to collision with high vanadium carbides, and has weaker rust prevention than stainless steel. It maintains core temperature control, prevents deformation, prevents tooth
-
2026-06-22
What are the applications of tungsten steel angle knives in the mechanical manufacturing industry
Tungsten steel angle milling cutters include chamfering cutters, single/double angle milling cutters, dovetail groove milling cutters, taper angle milling cutters, T-shaped angle milling cutters, relying on fixed inclination cutting edges, specializing in inclined surfaces, V-grooves, dovetail grooves, chamfering, inclined tables, and reverse buckle structures, suitable for CNC machining centers,
-
15 06 2026
What is the service life of the slitting round knife reflected in
1、 Cutting quality degradation (the most direct way to determine the end of life) 1. The burrs on the incision become more variable and larger The initial section is smooth and flat; After the tool wears out, burrs, flanging, and drawing appear on the upper and lower edges of the material, especially when cutting thin films, paper, metal foil, and tape. Excessive burrs indicate that the cutting
-
08 06 2026
What should be noted when using a double angle round knife
1、 Pre startup inspection (safety first) Personal protection: must wear protective goggles, cut resistant gloves, dust masks, and safety shoes; Long hair should be tied up with tight cuffs.
-
01 06 2026
What is the function of high-speed steel saw blade milling cutter
Core: Mainly used for milling, cutting, slotting, and slotting, it belongs to multi blade rotating cutting tools, suitable for ordinary machine tools/machining centers, mostly made of high-speed steel (HSS) material, with good toughness and less prone to tooth breakage.
-
25 05 2026
What is the purpose of high-speed steel three sided milling cutter with staggered teeth
High speed steel three sided milling cutters with staggered teeth are mainly used for efficient milling of deep grooves, wide grooves, step surfaces, and side surfaces. They are suitable for medium hardness metals (carbon steel, cast iron, etc.) and are known for smooth cutting, good chip removal, and low vibration.
-
18 05 2026
What are the applications of high-speed steel saw blade milling cutters in the metal industry
High speed steel saw blade milling cutters are commonly used cutting tools in the field of metal processing due to their high hardness, good toughness, sharp cutting edge, wear resistance, durability, and strong versatility. They are widely suitable for various steel, non-ferrous metals, and general mechanical processing scenarios. The specific applications are as follows:
-
11 05 2026
What is the function of tungsten steel saw blade
Tungsten steel saw blade is a hard alloy saw blade with tungsten steel (hard alloy) embedded in the teeth. Its core function is high-speed, sharp, wear-resistant, and high-temperature resistant. It can cut various hard materials and has a much higher durability than ordinary steel saw blades.
-
06 05 2026
What are the applications of flat mouth circular knives in the plastic industry
The core of the flat mouth circular knife in the plastic industry is high-speed precision cutting+smooth and burr free cutting, covering the entire process of film, sheet, pipe, composite material and recycling granulation, suitable for soft/hard/foam plastics, and is the main tool for mass production.
-
27 04 2026
What are the material properties of high-speed steel single angle milling cutters
High speed steel single angle milling cutters are commonly used in four categories: W18Cr4V (W18), W6Mo5Cr4V2 (6542/M2), M42 (containing cobalt), and powder high-speed steel ASP. The core properties are high toughness, easy grinding, and good strength, but the red hardness/wear resistance is weaker than that of hard alloys, making it suitable for low-speed, complex angle groove/inclined surface ma