News Center
Contact: Mr. Jin
Tel: 13901575780
0512-52428686
Contact: Mr. Zha
Tel: 13913639797
0512-52422071
Address: No. 59, Huyi Road, Liantang, Shanghu Town, Changshu City, Jiangsu Province.
-
2026-08-17
What are the applicable scenarios for high-speed steel sharp edged knives
1、 High speed steel sharp angle turning tool for lathe (welding/integral high-speed steel sharp tool) Applicable scenarios 1. Processing of ordinary horizontal lathes, old CNC lathes, and instrument lathes The machine speed is too low, which perfectly matches the cutting characteristics of high-speed steel. 2. Coarse and fine turning of shafts and small parts, and root cleani
-
2026-08-10
What are the applications of high-speed steel single angle milling cutters in the mold manufacturing
High speed steel single angle milling cutter, with a cutting edge with a single-sided conical angle, is divided into symmetrical and asymmetrical single angle milling cutters. Made of high-speed steel (HSS), it has good toughness and impact resistance, suitable for semi precision and precision machining of mold steel. It focuses on processing various inclined slots, chamfers, retreat slots, and mo
-
03 08 2026
What should be noted when using tungsten steel pipe cutting saw blades
Applicable: steel pipes, stainless steel pipes, copper pipes, aluminum pipes, profiles, commonly used in pipe cutting machines and metal circular saw machines; Distinguish between cold saw blades (low-speed wet cutting) and high-speed dry cutting saw blades, and prioritize cold cutting for the vast majority of pipe cutting.
-
28 07 2026
Where is the multifunctionality of the double angle circular knife reflected
1、 Flexible cutting adaptation direction, both positive and negative directions can be cut separately 1. Single angle circular knives can only be used with one side facing fixed, and reverse cutting is prone to material compression, fuzzing, and deviation; 2. Double angle circular cutter with symmetrical inclined surfaces on both sides, capable of cutting normally when the blade is i
-
20 07 2026
What are the applications of coated saw blade milling cutters in the aerospace industry
Coated saw blade milling cutters are divided into four categories: coated hard alloy saw blade milling cutters, coated high-speed steel saw blade milling cutters, diamond coated saw blade milling cutters, and CBN coated saw blade milling cutters. Relying on the high-temperature resistance, low friction, wear resistance, and anti sticking characteristics of coatings, they specialize in solving the
-
13 07 2026
What are the applications of flat edged circular knives in the packaging industry
1、 Cutting type 1. Adhesive packaging materials BOPP sealing tape, masking paper, double-sided tape, foam tape, release paper strips. The entire large mother roll is divided into a certain width by a flat edged circular knife; The tungsten steel flat mouth round knife runs at high speed, with a smooth cut and no wire drawing on the adhesive layer.
-
06 07 2026
How is the machining compatibility of high-speed steel single angle milling cutters
High speed steel (HSS) single angle milling cutter, with a tooth profile of single-sided inclined slope+straight edge, specializes in chamfering, milling groove, milling dovetail groove, angle forming, deburring, with core advantages of good toughness, anti chipping edge, and lower short plate hardness than hard alloy. It is suitable for materials, machine tools, and working conditions with clear
-
29 06 2026
What issues should be noted during the daily maintenance of high-speed steel V3 saw blade milling cu
V3 belongs to high vanadium high-performance high-speed steel, with a hardness of HRC63~66 and strong wear resistance. However, it is prone to annealing at high temperatures, has a thin and easily deformed substrate, is resistant to collision with high vanadium carbides, and has weaker rust prevention than stainless steel. It maintains core temperature control, prevents deformation, prevents tooth
-
22 06 2026
What are the applications of tungsten steel angle knives in the mechanical manufacturing industry
Tungsten steel angle milling cutters include chamfering cutters, single/double angle milling cutters, dovetail groove milling cutters, taper angle milling cutters, T-shaped angle milling cutters, relying on fixed inclination cutting edges, specializing in inclined surfaces, V-grooves, dovetail grooves, chamfering, inclined tables, and reverse buckle structures, suitable for CNC machining centers,
-
15 06 2026
What is the service life of the slitting round knife reflected in
1、 Cutting quality degradation (the most direct way to determine the end of life) 1. The burrs on the incision become more variable and larger The initial section is smooth and flat; After the tool wears out, burrs, flanging, and drawing appear on the upper and lower edges of the material, especially when cutting thin films, paper, metal foil, and tape. Excessive burrs indicate that the cutting