News Center
Contact: Mr. Jin
Tel: 13901575780
0512-52428686
Contact: Mr. Zha
Tel: 13913639797
0512-52422071
Address: No. 59, Huyi Road, Liantang, Shanghu Town, Changshu City, Jiangsu Province.
-
2026-07-28
Where is the multifunctionality of the double angle circular knife reflected
1、 Flexible cutting adaptation direction, both positive and negative directions can be cut separately 1. Single angle circular knives can only be used with one side facing fixed, and reverse cutting is prone to material compression, fuzzing, and deviation; 2. Double angle circular cutter with symmetrical inclined surfaces on both sides, capable of cutting normally when the blade is i
-
2026-07-20
What are the applications of coated saw blade milling cutters in the aerospace industry
Coated saw blade milling cutters are divided into four categories: coated hard alloy saw blade milling cutters, coated high-speed steel saw blade milling cutters, diamond coated saw blade milling cutters, and CBN coated saw blade milling cutters. Relying on the high-temperature resistance, low friction, wear resistance, and anti sticking characteristics of coatings, they specialize in solving the
-
13 07 2026
What are the applications of flat edged circular knives in the packaging industry
1、 Cutting type 1. Adhesive packaging materials BOPP sealing tape, masking paper, double-sided tape, foam tape, release paper strips. The entire large mother roll is divided into a certain width by a flat edged circular knife; The tungsten steel flat mouth round knife runs at high speed, with a smooth cut and no wire drawing on the adhesive layer.
-
06 07 2026
How is the machining compatibility of high-speed steel single angle milling cutters
High speed steel (HSS) single angle milling cutter, with a tooth profile of single-sided inclined slope+straight edge, specializes in chamfering, milling groove, milling dovetail groove, angle forming, deburring, with core advantages of good toughness, anti chipping edge, and lower short plate hardness than hard alloy. It is suitable for materials, machine tools, and working conditions with clear
-
29 06 2026
What issues should be noted during the daily maintenance of high-speed steel V3 saw blade milling cu
V3 belongs to high vanadium high-performance high-speed steel, with a hardness of HRC63~66 and strong wear resistance. However, it is prone to annealing at high temperatures, has a thin and easily deformed substrate, is resistant to collision with high vanadium carbides, and has weaker rust prevention than stainless steel. It maintains core temperature control, prevents deformation, prevents tooth
-
22 06 2026
What are the applications of tungsten steel angle knives in the mechanical manufacturing industry
Tungsten steel angle milling cutters include chamfering cutters, single/double angle milling cutters, dovetail groove milling cutters, taper angle milling cutters, T-shaped angle milling cutters, relying on fixed inclination cutting edges, specializing in inclined surfaces, V-grooves, dovetail grooves, chamfering, inclined tables, and reverse buckle structures, suitable for CNC machining centers,
-
15 06 2026
What is the service life of the slitting round knife reflected in
1、 Cutting quality degradation (the most direct way to determine the end of life) 1. The burrs on the incision become more variable and larger The initial section is smooth and flat; After the tool wears out, burrs, flanging, and drawing appear on the upper and lower edges of the material, especially when cutting thin films, paper, metal foil, and tape. Excessive burrs indicate that the cutting
-
08 06 2026
What should be noted when using a double angle round knife
1、 Pre startup inspection (safety first) Personal protection: must wear protective goggles, cut resistant gloves, dust masks, and safety shoes; Long hair should be tied up with tight cuffs.
-
01 06 2026
What is the function of high-speed steel saw blade milling cutter
Core: Mainly used for milling, cutting, slotting, and slotting, it belongs to multi blade rotating cutting tools, suitable for ordinary machine tools/machining centers, mostly made of high-speed steel (HSS) material, with good toughness and less prone to tooth breakage.
-
25 05 2026
What is the purpose of high-speed steel three sided milling cutter with staggered teeth
High speed steel three sided milling cutters with staggered teeth are mainly used for efficient milling of deep grooves, wide grooves, step surfaces, and side surfaces. They are suitable for medium hardness metals (carbon steel, cast iron, etc.) and are known for smooth cutting, good chip removal, and low vibration.